REPLACEMENT of BALL BEARINGS and SAJLENTBLOKOV on the PEUGEOT 206 SEDAN
Replace front ball bearings and sajlentblokov can be done in two ways. The first is the large replacement (replacing new lever fully assembled). Buy a new lever with a new ball hinge and new front and rear sajlentblokami. This will cost you about $ 170 from two levers, depending on the manufacturer. Resort to this method all branded service stations, not wanting to deal with smaller repairs. Second – self-replacement sajlentblokov (purchased previously) and the restoration of the ball bearing. Four new rubber bushing (2 front and 2 rear) will cost you from about 35 dollars and the restoration of a ball bearing is approximately 30-35 dollars. Old spring knocks the old lever and zapressovuem new and restoration of the ball bearing will skilled worker for 2-4:0, it is advisable to prepare it all in advance to subsequently address only replacement parts (Lever Assembly). In the end we see that the second method is more economical for the first approximately 100 dollars. The disassembly, replacement and reassembly work didn't take. All subsequent work to be done on the avtopod″emnike. Lifting a car, first turn off and remove the engine protection. Removing front wheel hub nut, unscrew the bolt ball bearing and rocking release the rudder tip. We now have the front Struts in a free State, that allows us to remove the ball from the base of the hub (at harvest-ball attach desired angle and direction for easy exit supports). Next, unscrew the two long bolts (mounting means of silent blocs) on each arm, and gently remove all the old lever with seat. Now we change the old item on new and proceed to Assembly. I believe – nothing complicated, see photo ...
-
