After a distance of 120 thousand kilometers drip right, and 5
thousand kilometers through the drip and the left brake master cylinder.
But despair not worth replacing the two cylinders takes no more than
4:0. To do this in advance to buy spare new wheel cylinders and
brake fluid. I advise you to buy the firm cylinders "Lpr"-reliable and
good are nursed at least 100 thousand.
Removal PROCEDURE 1. Remove the brake drum. 2. using pliers, remove the top spring compressive brake pads. 3. remove the upper ends of the brake pads with a brake cylinder Pistons. 4. using the G-shaped clamp, the brake hose in place of perežat′, closest to the brake cylinder. 5. remove the dirt around the brake hose connections and working back brake cylinder. 6. unscrew the coupling nut. 7. carefully remove the brake pipe from the brake cylinder. 8. close the pipe and brake cylinder Stoppers. 9. unscrew two bolts fastening work brake cylinder to the brake Panel. 10. carefully lift the brake cylinder.
Installation PROCEDURE 1. Verify that the mating surface on the shield and the brake cylinder clean. 2. set the brake cylinder in place. 3. set the brake pipe in the brake master cylinder and 2-3 turns screw on coupling nut. 4. screw two screws fixing the brake cylinder to the brake work shield and tighten them to desired point. 5. tighten nut brake pipe to the brake cylinder. 6. remove the brake hose clamp. 7. install the upper part of the brake pads in the brake cylinder and the piston grooves work. 8. Install the upper return spring of brake pads. 9. Install brake drum. 10. remove the air from the brake system.
-
